src/jsr166e/StampedLock.java

/*
 * Written by Doug Lea with assistance from members of JCP JSR-166
 * Expert Group and released to the public domain, as explained at
 * http://creativecommons.org/publicdomain/zero/1.0/
 */

package jsr166e;

import java.util.concurrent.ThreadLocalRandom;
import java.util.concurrent.TimeUnit;
import java.util.concurrent.locks.Lock;
import java.util.concurrent.locks.Condition;
import java.util.concurrent.locks.ReadWriteLock;
import java.util.concurrent.locks.LockSupport;

/**
 * A capability-based lock with three modes for controlling read/write
 * access.  The state of a StampedLock consists of a version and mode.
 * Lock acquisition methods return a stamp that represents and
 * controls access with respect to a lock state; "try" versions of
 * these methods may instead return the special value zero to
 * represent failure to acquire access. Lock release and conversion
 * methods require stamps as arguments, and fail if they do not match
 * the state of the lock. The three modes are:
 *
 * <ul>
 *
 *  <li><b>Writing.</b> Method {@link #writeLock} possibly blocks
 *   waiting for exclusive access, returning a stamp that can be used
 *   in method {@link #unlockWrite} to release the lock. Untimed and
 *   timed versions of {@code tryWriteLock} are also provided. When
 *   the lock is held in write mode, no read locks may be obtained,
 *   and all optimistic read validations will fail.  </li>
 *
 *  <li><b>Reading.</b> Method {@link #readLock} possibly blocks
 *   waiting for non-exclusive access, returning a stamp that can be
 *   used in method {@link #unlockRead} to release the lock. Untimed
 *   and timed versions of {@code tryReadLock} are also provided. </li>
 *
 *  <li><b>Optimistic Reading.</b> Method {@link #tryOptimisticRead}
 *   returns a non-zero stamp only if the lock is not currently held
 *   in write mode. Method {@link #validate} returns true if the lock
 *   has not since been acquired in write mode. This mode can be
 *   thought of as an extremely weak version of a read-lock, that can
 *   be broken by a writer at any time.  The use of optimistic mode
 *   for short read-only code segments often reduces contention and
 *   improves throughput.  However, its use is inherently fragile.
 *   Optimistic read sections should only read fields and hold them in
 *   local variables for later use after validation. Fields read while
 *   in optimistic mode may be wildly inconsistent, so usage applies
 *   only when you are familiar enough with data representations to
 *   check consistency and/or repeatedly invoke method {@code
 *   validate()}.  For example, such steps are typically required when
 *   first reading an object or array reference, and then accessing
 *   one of its fields, elements or methods. </li>
 *
 * </ul>
 *
 * <p>This class also supports methods that conditionally provide
 * conversions across the three modes. For example, method {@link
 * #tryConvertToWriteLock} attempts to "upgrade" a mode, returning
 * a valid write stamp if (1) already in writing mode (2) in reading
 * mode and there are no other readers or (3) in optimistic mode and
 * the lock is available. The forms of these methods are designed to
 * help reduce some of the code bloat that otherwise occurs in
 * retry-based designs.
 *
 * <p>StampedLocks are designed for use as internal utilities in the
 * development of thread-safe components. Their use relies on
 * knowledge of the internal properties of the data, objects, and
 * methods they are protecting.  They are not reentrant, so locked
 * bodies should not call other unknown methods that may try to
 * re-acquire locks (although you may pass a stamp to other methods
 * that can use or convert it).  The use of read lock modes relies on
 * the associated code sections being side-effect-free.  Unvalidated
 * optimistic read sections cannot call methods that are not known to
 * tolerate potential inconsistencies.  Stamps use finite
 * representations, and are not cryptographically secure (i.e., a
 * valid stamp may be guessable). Stamp values may recycle after (no
 * sooner than) one year of continuous operation. A stamp held without
 * use or validation for longer than this period may fail to validate
 * correctly.  StampedLocks are serializable, but always deserialize
 * into initial unlocked state, so they are not useful for remote
 * locking.
 *
 * <p>The scheduling policy of StampedLock does not consistently
 * prefer readers over writers or vice versa.  All "try" methods are
 * best-effort and do not necessarily conform to any scheduling or
 * fairness policy. A zero return from any "try" method for acquiring
 * or converting locks does not carry any information about the state
 * of the lock; a subsequent invocation may succeed.
 *
 * <p>Because it supports coordinated usage across multiple lock
 * modes, this class does not directly implement the {@link Lock} or
 * {@link ReadWriteLock} interfaces. However, a StampedLock may be
 * viewed {@link #asReadLock()}, {@link #asWriteLock()}, or {@link
 * #asReadWriteLock()} in applications requiring only the associated
 * set of functionality.
 *
 * <p><b>Sample Usage.</b> The following illustrates some usage idioms
 * in a class that maintains simple two-dimensional points. The sample
 * code illustrates some try/catch conventions even though they are
 * not strictly needed here because no exceptions can occur in their
 * bodies.<br>
 *
 *  <pre>{@code
 * class Point {
 *   private double x, y;
 *   private final StampedLock sl = new StampedLock();
 *
 *   void move(double deltaX, double deltaY) { // an exclusively locked method
 *     long stamp = sl.writeLock();
 *     try {
 *       x += deltaX;
 *       y += deltaY;
 *     } finally {
 *       sl.unlockWrite(stamp);
 *     }
 *   }
 *
 *   double distanceFromOriginV1() { // A read-only method
 *     long stamp;
 *     if ((stamp = sl.tryOptimisticRead()) != 0L) { // optimistic
 *       double currentX = x;
 *       double currentY = y;
 *       if (sl.validate(stamp))
 *         return Math.sqrt(currentX * currentX + currentY * currentY);
 *     }
 *     stamp = sl.readLock(); // fall back to read lock
 *     try {
 *       double currentX = x;
 *       double currentY = y;
 *         return Math.sqrt(currentX * currentX + currentY * currentY);
 *     } finally {
 *       sl.unlockRead(stamp);
 *     }
 *   }
 *
 *   double distanceFromOriginV2() { // combines code paths
 *     double currentX = 0.0, currentY = 0.0;
 *     for (long stamp = sl.tryOptimisticRead(); ; stamp = sl.readLock()) {
 *       try {
 *         currentX = x;
 *         currentY = y;
 *       } finally {
 *         if (sl.tryConvertToOptimisticRead(stamp) != 0L) // unlock or validate
 *           break;
 *       }
 *     }
 *     return Math.sqrt(currentX * currentX + currentY * currentY);
 *   }
 *
 *   void moveIfAtOrigin(double newX, double newY) { // upgrade
 *     // Could instead start with optimistic, not read mode
 *     long stamp = sl.readLock();
 *     try {
 *       while (x == 0.0 && y == 0.0) {
 *         long ws = sl.tryConvertToWriteLock(stamp);
 *         if (ws != 0L) {
 *           stamp = ws;
 *           x = newX;
 *           y = newY;
 *           break;
 *         }
 *         else {
 *           sl.unlockRead(stamp);
 *           stamp = sl.writeLock();
 *         }
 *       }
 *     } finally {
 *       sl.unlock(stamp);
 *     }
 *   }
 * }}</pre>
 *
 * @since 1.8
 * @author Doug Lea
 */
public class StampedLock implements java.io.Serializable {
    /*
     * Algorithmic notes:
     *
     * The design employs elements of Sequence locks
     * (as used in linux kernels; see Lameter's
     * http://www.lameter.com/gelato2005.pdf
     * and elsewhere; see
     * Boehm's http://www.hpl.hp.com/techreports/2012/HPL-2012-68.html)
     * and Ordered RW locks (see Shirako et al
     * http://dl.acm.org/citation.cfm?id=2312015)
     *
     * Conceptually, the primary state of the lock includes a sequence
     * number that is odd when write-locked and even otherwise.
     * However, this is offset by a reader count that is non-zero when
     * read-locked.  The read count is ignored when validating
     * "optimistic" seqlock-reader-style stamps.  Because we must use
     * a small finite number of bits (currently 7) for readers, a
     * supplementary reader overflow word is used when the number of
     * readers exceeds the count field. We do this by treating the max
     * reader count value (RBITS) as a spinlock protecting overflow
     * updates.
     *
     * Waiters use a modified form of CLH lock used in
     * AbstractQueuedSynchronizer (see its internal documentation for
     * a fuller account), where each node is tagged (field mode) as
     * either a reader or writer. Sets of waiting readers are grouped
     * (linked) under a common node (field cowait) so act as a single
     * node with respect to most CLH mechanics.  By virtue of the
     * queue structure, wait nodes need not actually carry sequence
     * numbers; we know each is greater than its predecessor.  This
     * simplifies the scheduling policy to a mainly-FIFO scheme that
     * incorporates elements of Phase-Fair locks (see Brandenburg &
     * Anderson, especially http://www.cs.unc.edu/~bbb/diss/).  In
     * particular, we use the phase-fair anti-barging rule: If an
     * incoming reader arrives while read lock is held but there is a
     * queued writer, this incoming reader is queued.  (This rule is
     * responsible for some of the complexity of method acquireRead,
     * but without it, the lock becomes highly unfair.)
     *
     * These rules apply to threads actually queued. All tryLock forms
     * opportunistically try to acquire locks regardless of preference
     * rules, and so may "barge" their way in.  Randomized spinning is
     * used in the acquire methods to reduce (increasingly expensive)
     * context switching while also avoiding sustained memory
     * thrashing among many threads.  We limit spins to the head of
     * queue. A thread spin-waits up to SPINS times (where each
     * iteration decreases spin count with 50% probability) before
     * blocking. If, upon wakening it fails to obtain lock, and is
     * still (or becomes) the first waiting thread (which indicates
     * that some other thread barged and obtained lock), it escalates
     * spins (up to MAX_HEAD_SPINS) to reduce the likelihood of
     * continually losing to barging threads.
     *
     * Nearly all of these mechanics are carried out in methods
     * acquireWrite and acquireRead, that, as typical of such code,
     * sprawl out because actions and retries rely on consitent sets
     * of locally cached reads.
     *
     * As noted in Boehm's paper (above), sequence validation (mainly
     * method validate()) requires stricter ordering rules than apply
     * to normal volatile reads (of "state").  In the absence of (but
     * continual hope for) explicit JVM support of intrinsics with
     * double-sided reordering prohibition, or corresponding fence
     * intrinsics, we for now uncomfortably rely on the fact that the
     * Unsafe.getXVolatile intrinsic must have this property
     * (syntactic volatile reads do not) for internal purposes anyway,
     * even though it is not documented.
     *
     * The memory layout keeps lock state and queue pointers together
     * (normally on the same cache line). This usually works well for
     * read-mostly loads. In most other cases, the natural tendency of
     * adaptive-spin CLH locks to reduce memory contention lessens
     * motivation to further spread out contended locations, but might
     * be subject to future improvements.
     */
    private static final long serialVersionUID = -6001602636862214147L;

    /** Number of processors, for spin control */
    private static final int NCPU = Runtime.getRuntime().availableProcessors();

    /** Maximum number of retries before blocking on acquisition */
    private static final int SPINS = (NCPU > 1) ? 1 << 6 : 0;

    /** Maximum number of retries before re-blocking */
    private static final int MAX_HEAD_SPINS = (NCPU > 1) ? 1 << 12 : 0;

    /** The period for yielding when waiting for overflow spinlock */
    private static final int OVERFLOW_YIELD_RATE = 7; // must be power 2 - 1

    /** The number of bits to use for reader count before overflowing */
    private static final int LG_READERS = 7;

    // Values for lock state and stamp operations
    private static final long RUNIT = 1L;
    private static final long WBIT  = 1L << LG_READERS;
    private static final long RBITS = WBIT - 1L;
    private static final long RFULL = RBITS - 1L;
    private static final long ABITS = RBITS | WBIT;
    private static final long SBITS = ~RBITS; // note overlap with ABITS

    // Initial value for lock state; avoid failure value zero
    private static final long ORIGIN = WBIT << 1;

    // Special value from cancelled acquire methods so caller can throw IE
    private static final long INTERRUPTED = 1L;

    // Values for node status; order matters
    private static final int WAITING   = -1;
    private static final int CANCELLED =  1;

    // Modes for nodes (int not boolean to allow arithmetic)
    private static final int RMODE = 0;
    private static final int WMODE = 1;

    /** Wait nodes */
    static final class WNode {
        volatile WNode prev;
        volatile WNode next;
        volatile WNode cowait;    // list of linked readers
        volatile Thread thread;   // non-null while possibly parked
        volatile int status;      // 0, WAITING, or CANCELLED
        final int mode;           // RMODE or WMODE
        WNode(int m, WNode p) { mode = m; prev = p; }
    }

    /** Head of CLH queue */
    private transient volatile WNode whead;
    /** Tail (last) of CLH queue */
    private transient volatile WNode wtail;

    // views
    transient ReadLockView readLockView;
    transient WriteLockView writeLockView;
    transient ReadWriteLockView readWriteLockView;

    /** Lock sequence/state */
    private transient volatile long state;
    /** extra reader count when state read count saturated */
    private transient int readerOverflow;

    /**
     * Creates a new lock, initially in unlocked state.
     */
    public StampedLock() {
        state = ORIGIN;
    }

    /**
     * Exclusively acquires the lock, blocking if necessary
     * until available.
     *
     * @return a stamp that can be used to unlock or convert mode
     */
    public long writeLock() {
        long s, next;  // bypass acquireWrite in fully onlocked case only
        return ((((s = state) & ABITS) == 0L &&
                 U.compareAndSwapLong(this, STATE, s, next = s + WBIT)) ?
                next : acquireWrite(false, 0L));
    }

    /**
     * Exclusively acquires the lock if it is immediately available.
     *
     * @return a stamp that can be used to unlock or convert mode,
     * or zero if the lock is not available
     */
    public long tryWriteLock() {
        long s, next;
        return ((((s = state) & ABITS) == 0L &&
                 U.compareAndSwapLong(this, STATE, s, next = s + WBIT)) ?
                next : 0L);
    }

    /**
     * Exclusively acquires the lock if it is available within the
     * given time and the current thread has not been interrupted.
     * Behavior under timeout and interruption matches that specified
     * for method {@link Lock#tryLock(long,TimeUnit)}.
     *
     * @return a stamp that can be used to unlock or convert mode,
     * or zero if the lock is not available
     * @throws InterruptedException if the current thread is interrupted
     * before acquiring the lock
     */
    public long tryWriteLock(long time, TimeUnit unit)
        throws InterruptedException {
        long nanos = unit.toNanos(time);
        if (!Thread.interrupted()) {
            long next, deadline;
            if ((next = tryWriteLock()) != 0L)
                return next;
            if (nanos <= 0L)
                return 0L;
            if ((deadline = System.nanoTime() + nanos) == 0L)
                deadline = 1L;
            if ((next = acquireWrite(true, deadline)) != INTERRUPTED)
                return next;
        }
        throw new InterruptedException();
    }

    /**
     * Exclusively acquires the lock, blocking if necessary
     * until available or the current thread is interrupted.
     * Behavior under interruption matches that specified
     * for method {@link Lock#lockInterruptibly()}.
     *
     * @return a stamp that can be used to unlock or convert mode
     * @throws InterruptedException if the current thread is interrupted
     * before acquiring the lock
     */
    public long writeLockInterruptibly() throws InterruptedException {
        long next;
        if (!Thread.interrupted() &&
            (next = acquireWrite(true, 0L)) != INTERRUPTED)
            return next;
        throw new InterruptedException();
    }

    /**
     * Non-exclusively acquires the lock, blocking if necessary
     * until available.
     *
     * @return a stamp that can be used to unlock or convert mode
     */
    public long readLock() {
        long s, next;  // bypass acquireRead on fully onlocked case only
        return ((((s = state) & ABITS) == 0L &&
                 U.compareAndSwapLong(this, STATE, s, next = s + RUNIT)) ?
                next : acquireRead(false, 0L));
    }

    /**
     * Non-exclusively acquires the lock if it is immediately available.
     *
     * @return a stamp that can be used to unlock or convert mode,
     * or zero if the lock is not available
     */
    public long tryReadLock() {
        for (;;) {
            long s, m, next;
            if ((m = (s = state) & ABITS) == WBIT)
                return 0L;
            else if (m < RFULL) {
                if (U.compareAndSwapLong(this, STATE, s, next = s + RUNIT))
                    return next;
            }
            else if ((next = tryIncReaderOverflow(s)) != 0L)
                return next;
        }
    }

    /**
     * Non-exclusively acquires the lock if it is available within the
     * given time and the current thread has not been interrupted.
     * Behavior under timeout and interruption matches that specified
     * for method {@link Lock#tryLock(long,TimeUnit)}.
     *
     * @return a stamp that can be used to unlock or convert mode,
     * or zero if the lock is not available
     * @throws InterruptedException if the current thread is interrupted
     * before acquiring the lock
     */
    public long tryReadLock(long time, TimeUnit unit)
        throws InterruptedException {
        long next, deadline;
        long nanos = unit.toNanos(time);
        if (!Thread.interrupted()) {
            if ((next = tryReadLock()) != 0L)
                return next;
            if (nanos <= 0L)
                return 0L;
            if ((deadline = System.nanoTime() + nanos) == 0L)
                deadline = 1L;
            if ((next = acquireRead(true, deadline)) != INTERRUPTED)
                return next;
        }
        throw new InterruptedException();
    }

    /**
     * Non-exclusively acquires the lock, blocking if necessary
     * until available or the current thread is interrupted.
     * Behavior under interruption matches that specified
     * for method {@link Lock#lockInterruptibly()}.
     *
     * @return a stamp that can be used to unlock or convert mode
     * @throws InterruptedException if the current thread is interrupted
     * before acquiring the lock
     */
    public long readLockInterruptibly() throws InterruptedException {
        long next;
        if (!Thread.interrupted() &&
            (next = acquireRead(true, 0L)) != INTERRUPTED)
            return next;
        throw new InterruptedException();
    }

    /**
     * Returns a stamp that can later be validated, or zero
     * if exclusively locked.
     *
     * @return a stamp, or zero if exclusively locked
     */
    public long tryOptimisticRead() {
        long s;
        return (((s = state) & WBIT) == 0L) ? (s & SBITS) : 0L;
    }

    /**
     * Returns true if the lock has not been exclusively acquired
     * since issuance of the given stamp. Always returns false if the
     * stamp is zero. Always returns true if the stamp represents a
     * currently held lock.
     *
     * @return true if the lock has not been exclusively acquired
     * since issuance of the given stamp; else false
     */
    public boolean validate(long stamp) {
        // See above about current use of getLongVolatile here
        return (stamp & SBITS) == (U.getLongVolatile(this, STATE) & SBITS);
    }

    /**
     * If the lock state matches the given stamp, releases the
     * exclusive lock.
     *
     * @param stamp a stamp returned by a write-lock operation
     * @throws IllegalMonitorStateException if the stamp does
     * not match the current state of this lock
     */
    public void unlockWrite(long stamp) {
        WNode h;
        if (state != stamp || (stamp & WBIT) == 0L)
            throw new IllegalMonitorStateException();
        state = (stamp += WBIT) == 0L ? ORIGIN : stamp;
        if ((h = whead) != null && h.status != 0)
            release(h);
    }

    /**
     * If the lock state matches the given stamp, releases the
     * non-exclusive lock.
     *
     * @param stamp a stamp returned by a read-lock operation
     * @throws IllegalMonitorStateException if the stamp does
     * not match the current state of this lock
     */
    public void unlockRead(long stamp) {
        long s, m; WNode h;
        for (;;) {
            if (((s = state) & SBITS) != (stamp & SBITS) ||
                (stamp & ABITS) == 0L || (m = s & ABITS) == 0L || m == WBIT)
                throw new IllegalMonitorStateException();
            if (m < RFULL) {
                if (U.compareAndSwapLong(this, STATE, s, s - RUNIT)) {
                    if (m == RUNIT && (h = whead) != null && h.status != 0)
                        release(h);
                    break;
                }
            }
            else if (tryDecReaderOverflow(s) != 0L)
                break;
        }
    }

    /**
     * If the lock state matches the given stamp, releases the
     * corresponding mode of the lock.
     *
     * @param stamp a stamp returned by a lock operation
     * @throws IllegalMonitorStateException if the stamp does
     * not match the current state of this lock
     */
    public void unlock(long stamp) {
        long a = stamp & ABITS, m, s; WNode h;
        while (((s = state) & SBITS) == (stamp & SBITS)) {
            if ((m = s & ABITS) == 0L)
                break;
            else if (m == WBIT) {
                if (a != m)
                    break;
                state = (s += WBIT) == 0L ? ORIGIN : s;
                if ((h = whead) != null && h.status != 0)
                    release(h);
                return;
            }
            else if (a == 0L || a >= WBIT)
                break;
            else if (m < RFULL) {
                if (U.compareAndSwapLong(this, STATE, s, s - RUNIT)) {
                    if (m == RUNIT && (h = whead) != null && h.status != 0)
                        release(h);
                    return;
                }
            }
            else if (tryDecReaderOverflow(s) != 0L)
                return;
        }
        throw new IllegalMonitorStateException();
    }

    /**
     * If the lock state matches the given stamp, performs one of
     * the following actions. If the stamp represents holding a write
     * lock, returns it.  Or, if a read lock, if the write lock is
     * available, releases the read lock and returns a write stamp.
     * Or, if an optimistic read, returns a write stamp only if
     * immediately available. This method returns zero in all other
     * cases.
     *
     * @param stamp a stamp
     * @return a valid write stamp, or zero on failure
     */
    public long tryConvertToWriteLock(long stamp) {
        long a = stamp & ABITS, m, s, next;
        while (((s = state) & SBITS) == (stamp & SBITS)) {
            if ((m = s & ABITS) == 0L) {
                if (a != 0L)
                    break;
                if (U.compareAndSwapLong(this, STATE, s, next = s + WBIT))
                    return next;
            }
            else if (m == WBIT) {
                if (a != m)
                    break;
                return stamp;
            }
            else if (m == RUNIT && a != 0L) {
                if (U.compareAndSwapLong(this, STATE, s,
                                         next = s - RUNIT + WBIT))
                    return next;
            }
            else
                break;
        }
        return 0L;
    }

    /**
     * If the lock state matches the given stamp, performs one of
     * the following actions. If the stamp represents holding a write
     * lock, releases it and obtains a read lock.  Or, if a read lock,
     * returns it. Or, if an optimistic read, acquires a read lock and
     * returns a read stamp only if immediately available. This method
     * returns zero in all other cases.
     *
     * @param stamp a stamp
     * @return a valid read stamp, or zero on failure
     */
    public long tryConvertToReadLock(long stamp) {
        long a = stamp & ABITS, m, s, next; WNode h;
        while (((s = state) & SBITS) == (stamp & SBITS)) {
            if ((m = s & ABITS) == 0L) {
                if (a != 0L)
                    break;
                else if (m < RFULL) {
                    if (U.compareAndSwapLong(this, STATE, s, next = s + RUNIT))
                        return next;
                }
                else if ((next = tryIncReaderOverflow(s)) != 0L)
                    return next;
            }
            else if (m == WBIT) {
                if (a != m)
                    break;
                state = next = s + (WBIT + RUNIT);
                if ((h = whead) != null && h.status != 0)
                    release(h);
                return next;
            }
            else if (a != 0L && a < WBIT)
                return stamp;
            else
                break;
        }
        return 0L;
    }

    /**
     * If the lock state matches the given stamp then, if the stamp
     * represents holding a lock, releases it and returns an
     * observation stamp.  Or, if an optimistic read, returns it if
     * validated. This method returns zero in all other cases, and so
     * may be useful as a form of "tryUnlock".
     *
     * @param stamp a stamp
     * @return a valid optimistic read stamp, or zero on failure
     */
    public long tryConvertToOptimisticRead(long stamp) {
        long a = stamp & ABITS, m, s, next; WNode h;
        for (;;) {
            s = U.getLongVolatile(this, STATE); // see above
            if ((s & SBITS) != (stamp & SBITS))
                break;
            if ((m = s & ABITS) == 0L) {
                if (a != 0L)
                    break;
                return s;
            }
            else if (m == WBIT) {
                if (a != m)
                    break;
                state = next = (s += WBIT) == 0L ? ORIGIN : s;
                if ((h = whead) != null && h.status != 0)
                    release(h);
                return next;
            }
            else if (a == 0L || a >= WBIT)
                break;
            else if (m < RFULL) {
                if (U.compareAndSwapLong(this, STATE, s, next = s - RUNIT)) {
                    if (m == RUNIT && (h = whead) != null && h.status != 0)
                        release(h);
                    return next & SBITS;
                }
            }
            else if ((next = tryDecReaderOverflow(s)) != 0L)
                return next & SBITS;
        }
        return 0L;
    }

    /**
     * Releases the write lock if it is held, without requiring a
     * stamp value. This method may be useful for recovery after
     * errors.
     *
     * @return true if the lock was held, else false
     */
    public boolean tryUnlockWrite() {
        long s; WNode h;
        if (((s = state) & WBIT) != 0L) {
            state = (s += WBIT) == 0L ? ORIGIN : s;
            if ((h = whead) != null && h.status != 0)
                release(h);
            return true;
        }
        return false;
    }

    /**
     * Releases one hold of the read lock if it is held, without
     * requiring a stamp value. This method may be useful for recovery
     * after errors.
     *
     * @return true if the read lock was held, else false
     */
    public boolean tryUnlockRead() {
        long s, m; WNode h;
        while ((m = (s = state) & ABITS) != 0L && m < WBIT) {
            if (m < RFULL) {
                if (U.compareAndSwapLong(this, STATE, s, s - RUNIT)) {
                    if (m == RUNIT && (h = whead) != null && h.status != 0)
                        release(h);
                    return true;
                }
            }
            else if (tryDecReaderOverflow(s) != 0L)
                return true;
        }
        return false;
    }

    /**
     * Returns true if the lock is currently held exclusively.
     *
     * @return true if the lock is currently held exclusively
     */
    public boolean isWriteLocked() {
        return (state & WBIT) != 0L;
    }

    /**
     * Returns true if the lock is currently held non-exclusively.
     *
     * @return true if the lock is currently held non-exclusively
     */
    public boolean isReadLocked() {
        return (state & RBITS) != 0L;
    }

    private void readObject(java.io.ObjectInputStream s)
        throws java.io.IOException, ClassNotFoundException {
        s.defaultReadObject();
        state = ORIGIN; // reset to unlocked state
    }

    /**
     * Returns a plain {@link Lock} view of this StampedLock in which
     * the {@link Lock#lock} method is mapped to {@link #readLock},
     * and similarly for other methods. The returned Lock does not
     * support a {@link Condition}; method {@link
     * Lock#newCondition()} throws {@code
     * UnsupportedOperationException}.
     *
     * @return the lock
     */
    public Lock asReadLock() {
        ReadLockView v;
        return ((v = readLockView) != null ? v :
                (readLockView = new ReadLockView()));
    }

    /**
     * Returns a plain {@link Lock} view of this StampedLock in which
     * the {@link Lock#lock} method is mapped to {@link #writeLock},
     * and similarly for other methods. The returned Lock does not
     * support a {@link Condition}; method {@link
     * Lock#newCondition()} throws {@code
     * UnsupportedOperationException}.
     *
     * @return the lock
     */
    public Lock asWriteLock() {
        WriteLockView v;
        return ((v = writeLockView) != null ? v :
                (writeLockView = new WriteLockView()));
    }

    /**
     * Returns a {@link ReadWriteLock} view of this StampedLock in
     * which the {@link ReadWriteLock#readLock()} method is mapped to
     * {@link #asReadLock()}, and {@link ReadWriteLock#writeLock()} to
     * {@link #asWriteLock()}.
     *
     * @return the lock
     */
    public ReadWriteLock asReadWriteLock() {
        ReadWriteLockView v;
        return ((v = readWriteLockView) != null ? v :
                (readWriteLockView = new ReadWriteLockView()));
    }

    // view classes

    final class ReadLockView implements Lock {
        public void lock() { readLock(); }
        public void lockInterruptibly() throws InterruptedException {
            readLockInterruptibly();
        }
        public boolean tryLock() { return tryReadLock() != 0L; }
        public boolean tryLock(long time, TimeUnit unit)
            throws InterruptedException {
            return tryReadLock(time, unit) != 0L;
        }
        public void unlock() { unstampedUnlockRead(); }
        public Condition newCondition() {
            throw new UnsupportedOperationException();
        }
    }

    final class WriteLockView implements Lock {
        public void lock() { writeLock(); }
        public void lockInterruptibly() throws InterruptedException {
            writeLockInterruptibly();
        }
        public boolean tryLock() { return tryWriteLock() != 0L; }
        public boolean tryLock(long time, TimeUnit unit)
            throws InterruptedException {
            return tryWriteLock(time, unit) != 0L;
        }
        public void unlock() { unstampedUnlockWrite(); }
        public Condition newCondition() {
            throw new UnsupportedOperationException();
        }
    }

    final class ReadWriteLockView implements ReadWriteLock {
        public Lock readLock() { return asReadLock(); }
        public Lock writeLock() { return asWriteLock(); }
    }

    // Unlock methods without stamp argument checks for view classes.
    // Needed because view-class lock methods throw away stamps.

    final void unstampedUnlockWrite() {
        WNode h; long s;
        if (((s = state) & WBIT) == 0L)
            throw new IllegalMonitorStateException();
        state = (s += WBIT) == 0L ? ORIGIN : s;
        if ((h = whead) != null && h.status != 0)
            release(h);
    }

    final void unstampedUnlockRead() {
        for (;;) {
            long s, m; WNode h;
            if ((m = (s = state) & ABITS) == 0L || m >= WBIT)
                throw new IllegalMonitorStateException();
            else if (m < RFULL) {
                if (U.compareAndSwapLong(this, STATE, s, s - RUNIT)) {
                    if (m == RUNIT && (h = whead) != null && h.status != 0)
                        release(h);
                    break;
                }
            }
            else if (tryDecReaderOverflow(s) != 0L)
                break;
        }
    }

    // internals

    /**
     * Tries to increment readerOverflow by first setting state
     * access bits value to RBITS, indicating hold of spinlock,
     * then updating, then releasing.
     *
     * @param s, assumed that (s & ABITS) >= RFULL
     * @return new stamp on success, else zero
     */
    private long tryIncReaderOverflow(long s) {
        if ((s & ABITS) == RFULL) {
            if (U.compareAndSwapLong(this, STATE, s, s | RBITS)) {
                ++readerOverflow;
                state = s;
                return s;
            }
        }
        else if ((ThreadLocalRandom.current().nextInt() &
                  OVERFLOW_YIELD_RATE) == 0)
            Thread.yield();
        return 0L;
    }

    /**
     * Tries to decrement readerOverflow.
     *
     * @param s, assumed that (s & ABITS) >= RFULL
     * @return new stamp on success, else zero
     */
    private long tryDecReaderOverflow(long s) {
        if ((s & ABITS) == RFULL) {
            if (U.compareAndSwapLong(this, STATE, s, s | RBITS)) {
                int r; long next;
                if ((r = readerOverflow) > 0) {
                    readerOverflow = r - 1;
                    next = s;
                }
                else
                    next = s - RUNIT;
                 state = next;
                 return next;
            }
        }
        else if ((ThreadLocalRandom.current().nextInt() &
                  OVERFLOW_YIELD_RATE) == 0)
            Thread.yield();
        return 0L;
    }

    /*
     * Wakes up the successor of h (normally whead). This is normally
     * just h.next, but may require traversal from wtail if next
     * pointers are lagging. This may fail to wake up an acquiring
     * thread when one or more have been cancelled, but the cancel
     * methods themselves provide extra safeguards to ensure liveness.
     */
    private void release(WNode h) {
        if (h != null) {
            WNode q; Thread w;
            U.compareAndSwapInt(h, WSTATUS, WAITING, 0);
            if ((q = h.next) == null || q.status == CANCELLED) {
                for (WNode t = wtail; t != null && t != h; t = t.prev)
                    if (t.status <= 0)
                        q = t;
            }
            if (q != null) {
                for (WNode r = q;;) {  // release co-waiters too
                    if ((w = r.thread) != null) {
                        r.thread = null;
                        U.unpark(w);
                    }
                    if ((r = q.cowait) == null)
                        break;
                    U.compareAndSwapObject(q, WCOWAIT, r, r.cowait);
                }
            }
        }
    }

    /**
     * See above for explanation.
     *
     * @param interruptible true if should check interrupts and if so
     * return INTERRUPTED
     * @param deadline if nonzero, the System.nanoTime value to timeout
     * at (and return zero)
     * @return next state, or INTERRUPTED
     */
    private long acquireWrite(boolean interruptible, long deadline) {
        WNode node = null, p;
        for (int spins = -1;;) { // spin while enqueuing
            long s, ns;
            if (((s = state) & ABITS) == 0L) {
                if (U.compareAndSwapLong(this, STATE, s, ns = s + WBIT))
                    return ns;
            }
            else if (spins > 0) {
                if (ThreadLocalRandom.current().nextInt() >= 0)
                    --spins;
            }
            else if ((p = wtail) == null) { // initialize queue
                WNode h = new WNode(WMODE, null);
                if (U.compareAndSwapObject(this, WHEAD, null, h))
                    wtail = h;
            }
            else if (spins < 0)
                spins = (p == whead) ? SPINS : 0;
            else if (node == null)
                node = new WNode(WMODE, p);
            else if (node.prev != p)
                node.prev = p;
            else if (U.compareAndSwapObject(this, WTAIL, p, node)) {
                p.next = node;
                break;
            }
        }

        for (int spins = SPINS;;) {
            WNode np, pp; int ps; long s, ns; Thread w;
            while ((np = node.prev) != p && np != null)
                (p = np).next = node;   // stale
            if (whead == p) {
                for (int k = spins;;) { // spin at head
                    if (((s = state) & ABITS) == 0L) {
                        if (U.compareAndSwapLong(this, STATE, s, ns = s+WBIT)) {
                            whead = node;
                            node.prev = null;
                            return ns;
                        }
                    }
                    else if (ThreadLocalRandom.current().nextInt() >= 0 &&
                             --k <= 0)
                        break;
                }
                if (spins < MAX_HEAD_SPINS)
                    spins <<= 1;
            }
            if ((ps = p.status) == 0)
                U.compareAndSwapInt(p, WSTATUS, 0, WAITING);
            else if (ps == CANCELLED) {
                if ((pp = p.prev) != null) {
                    node.prev = pp;
                    pp.next = node;
                }
            }
            else {
                long time; // 0 argument to park means no timeout
                if (deadline == 0L)
                    time = 0L;
                else if ((time = deadline - System.nanoTime()) <= 0L)
                    return cancelWaiter(node, null, false);
                node.thread = Thread.currentThread();
                if (node.prev == p && p.status == WAITING && // recheck
                    (p != whead || (state & ABITS) != 0L)) {
                    U.park(false, time);
                    if (interruptible && Thread.interrupted())
                        return cancelWaiter(node, null, true);
                }
                node.thread = null;
            }
        }
    }

    /**
     * See above for explanation.
     *
     * @param interruptible true if should check interrupts and if so
     * return INTERRUPTED
     * @param deadline if nonzero, the System.nanoTime value to timeout
     * at (and return zero)
     * @return next state, or INTERRUPTED
     */
    private long acquireRead(boolean interruptible, long deadline) {
        WNode node = null, group = null, p;
        for (int spins = -1;;) {
            for (;;) {
                long s, m, ns; WNode h, q; Thread w; // anti-barging guard
                if (group == null && (h = whead) != null &&
                    (q = h.next) != null && q.mode != RMODE)
                    break;
                if ((m = (s = state) & ABITS) < RFULL ?
                    U.compareAndSwapLong(this, STATE, s, ns = s + RUNIT) :
                    (m < WBIT && (ns = tryIncReaderOverflow(s)) != 0L)) {
                    if (group != null) {  // help release others
                        for (WNode r = group;;) {
                            if ((w = r.thread) != null) {
                                r.thread = null;
                                U.unpark(w);
                            }
                            if ((r = group.cowait) == null)
                                break;
                            U.compareAndSwapObject(group, WCOWAIT, r, r.cowait);
                        }
                    }
                    return ns;
                }
                if (m >= WBIT)
                    break;
            }
            if (spins > 0) {
                if (ThreadLocalRandom.current().nextInt() >= 0)
                    --spins;
            }
            else if ((p = wtail) == null) {
                WNode h = new WNode(WMODE, null);
                if (U.compareAndSwapObject(this, WHEAD, null, h))
                    wtail = h;
            }
            else if (spins < 0)
                spins = (p == whead) ? SPINS : 0;
            else if (node == null)
                node = new WNode(WMODE, p);
            else if (node.prev != p)
                node.prev = p;
            else if (p.mode == RMODE && p != whead) {
                WNode pp = p.prev;  // become co-waiter with group p
                if (pp != null && p == wtail &&
                    U.compareAndSwapObject(p, WCOWAIT,
                                           node.cowait = p.cowait, node)) {
                    node.thread = Thread.currentThread();
                    for (long time;;) {
                        if (deadline == 0L)
                            time = 0L;
                        else if ((time = deadline - System.nanoTime()) <= 0L)
                            return cancelWaiter(node, p, false);
                        if (node.thread == null)
                            break;
                        if (p.prev != pp || p.status == CANCELLED ||
                            p == whead || p.prev != pp) {
                            node.thread = null;
                            break;
                        }
                        if (node.thread == null) // must recheck
                            break;
                        U.park(false, time);
                        if (interruptible && Thread.interrupted())
                            return cancelWaiter(node, p, true);
                    }
                    group = p;
                }
                node = null; // throw away
            }
            else if (U.compareAndSwapObject(this, WTAIL, p, node)) {
                p.next = node;
                break;
            }
        }

        for (int spins = SPINS;;) {
            WNode np, pp, r; int ps; long m, s, ns; Thread w;
            while ((np = node.prev) != p && np != null)
                (p = np).next = node;
            if (whead == p) {
                for (int k = spins;;) {
                    if ((m = (s = state) & ABITS) != WBIT) {
                        if (m < RFULL ?
                            U.compareAndSwapLong(this, STATE, s, ns = s + RUNIT):
                            (ns = tryIncReaderOverflow(s)) != 0L) {
                            whead = node;
                            node.prev = null;
                            while ((r = node.cowait) != null) {
                                if (U.compareAndSwapObject(node, WCOWAIT,
                                                           r, r.cowait) &&
                                    (w = r.thread) != null) {
                                    r.thread = null;
                                    U.unpark(w); // release co-waiter
                                }
                            }
                            return ns;
                        }
                    }
                    else if (ThreadLocalRandom.current().nextInt() >= 0 &&
                             --k <= 0)
                        break;
                }
                if (spins < MAX_HEAD_SPINS)
                    spins <<= 1;
            }
            if ((ps = p.status) == 0)
                U.compareAndSwapInt(p, WSTATUS, 0, WAITING);
            else if (ps == CANCELLED) {
                if ((pp = p.prev) != null) {
                    node.prev = pp;
                    pp.next = node;
                }
            }
            else {
                long time;
                if (deadline == 0L)
                    time = 0L;
                else if ((time = deadline - System.nanoTime()) <= 0L)
                    return cancelWaiter(node, null, false);
                node.thread = Thread.currentThread();
                if (node.prev == p && p.status == WAITING &&
                    (p != whead || (state & ABITS) != WBIT)) {
                    U.park(false, time);
                    if (interruptible && Thread.interrupted())
                        return cancelWaiter(node, null, true);
                }
                node.thread = null;
            }
        }
    }

    /**
     * If node non-null, forces cancel status and unsplices from queue
     * if possible. This is a variant of cancellation methods in
     * AbstractQueuedSynchronizer (see its detailed explanation in AQS
     * internal documentation) that more conservatively wakes up other
     * threads that may have had their links changed, so as to preserve
     * liveness in the main signalling methods.
     */
    private long cancelWaiter(WNode node, WNode group, boolean interrupted) {
        if (node != null) {
            node.thread = null;
            node.status = CANCELLED;
            if (group != null) {
                for (WNode p = group, q; p != null; p = q) {
                    if ((q = p.cowait) != null && q.status == CANCELLED) {
                        U.compareAndSwapObject(p, WCOWAIT, q, q.cowait);
                        break;
                    }
                }
            }
            else {
                for (WNode pred = node.prev; pred != null; ) {
                    WNode succ, pp; Thread w;
                    while ((succ = node.next) == null ||
                           succ.status == CANCELLED) {
                        WNode q = null;
                        for (WNode t = wtail; t != null && t != node; t = t.prev)
                            if (t.status != CANCELLED)
                                q = t;
                        if (succ == q ||
                            U.compareAndSwapObject(node, WNEXT,
                                                   succ, succ = q)) {
                            if (succ == null && node == wtail)
                                U.compareAndSwapObject(this, WTAIL, node, pred);
                            break;
                        }
                    }
                    if (pred.next == node)
                        U.compareAndSwapObject(pred, WNEXT, node, succ);
                    if (succ != null && (w = succ.thread) != null)
                        U.unpark(w);
                    if (pred.status != CANCELLED || (pp = pred.prev) == null)
                        break;
                    node.prev = pp; // repeat for new pred
                    U.compareAndSwapObject(pp, WNEXT, pred, succ);
                    pred = pp;
                }
            }
        }
        release(whead);
        return (interrupted || Thread.interrupted()) ? INTERRUPTED : 0L;
    }

    // Unsafe mechanics
    private static final sun.misc.Unsafe U;
    private static final long STATE;
    private static final long WHEAD;
    private static final long WTAIL;
    private static final long WNEXT;
    private static final long WSTATUS;
    private static final long WCOWAIT;

    static {
        try {
            U = getUnsafe();
            Class<?> k = StampedLock.class;
            Class<?> wk = WNode.class;
            STATE = U.objectFieldOffset
                (k.getDeclaredField("state"));
            WHEAD = U.objectFieldOffset
                (k.getDeclaredField("whead"));
            WTAIL = U.objectFieldOffset
                (k.getDeclaredField("wtail"));
            WSTATUS = U.objectFieldOffset
                (wk.getDeclaredField("status"));
            WNEXT = U.objectFieldOffset
                (wk.getDeclaredField("next"));
            WCOWAIT = U.objectFieldOffset
                (wk.getDeclaredField("cowait"));

        } catch (Exception e) {
            throw new Error(e);
        }
    }

    /**
     * Returns a sun.misc.Unsafe.  Suitable for use in a 3rd party package.
     * Replace with a simple call to Unsafe.getUnsafe when integrating
     * into a jdk.
     *
     * @return a sun.misc.Unsafe
     */
    private static sun.misc.Unsafe getUnsafe() {
        try {
            return sun.misc.Unsafe.getUnsafe();
        } catch (SecurityException tryReflectionInstead) {}
        try {
            return java.security.AccessController.doPrivileged
            (new java.security.PrivilegedExceptionAction<sun.misc.Unsafe>() {
                public sun.misc.Unsafe run() throws Exception {
                    Class<sun.misc.Unsafe> k = sun.misc.Unsafe.class;
                    for (java.lang.reflect.Field f : k.getDeclaredFields()) {
                        f.setAccessible(true);
                        Object x = f.get(null);
                        if (k.isInstance(x))
                            return k.cast(x);
                    }
                    throw new NoSuchFieldError("the Unsafe");
                }});
        } catch (java.security.PrivilegedActionException e) {
            throw new RuntimeException("Could not initialize intrinsics",
                                       e.getCause());
        }
    }
}
Revision:	1.29
Committed:	Wed Jan 23 17:29:18 2013 UTC (11 years, 3 months ago) by dl
Branch:	MAIN
Changes since 1.28:	+64 -37 lines
Log Message:	Minor improvements